Redefining the New Standard for Comfortable Pool Systems

In today’s pursuit of a high-quality lifestyle, a perfect swimming pool represents not only a venue for leisure and recreation but also a commitment to healthy living. However, the high humidity, cool temperatures, and pervasive smell of chlorine often detract from the enjoyment of the experience. To address these challenges, the BANDON "3-in-1" pool dehumidification heat pump was created. Designed specifically for swimming pools, this constant-temperature dehumidification solution redefines standards of comfort and health, transforming every swim into a delightful journey for both body and mind.

Working Principle of Dehumidification Heat Pump Units

The dehumidifying heat pump unit operates by efficiently circulating refrigerant to dehumidify and regulate the temperature of indoor air. The unit draws in warm, humid indoor air; a portion is exhausted outdoors, while the remainder mixes with fresh air and passes over the evaporator. Here, the low-temperature refrigerant absorbs heat, cooling the air below its dew point so that moisture condenses and is drained away, resulting in cool, dry air. This air then flows through the condenser and cooling coil for temperature adjustment before being returned to the indoor space, thereby achieving dehumidification and constant temperature control. After absorbing heat, the refrigerant is pressurized by the compressor; controlled by solenoid valves, the heat is selectively released—for air reheating, pool water heating, or outdoor exhaust—to provide auxiliary functions such as air reheating, pool water temperature maintenance, or air cooling.

High-efficiency dehumidification, energy-saving inverter technology.

The BANDON "three-in-one" pool dehumidification heat pump integrates five key functions—pool water heating, pool hall air dehumidification, indoor climate control, fresh air ventilation/exhaust, and heat recovery. It achieves low-energy, high-efficiency operation in the swimming pool sector, providing strong support for the green development of swimming pools.

1. Full DC inverter design

By utilizing a full DC inverter compressor, an inverter centrifugal fan, and an inverter outdoor fan to achieve "full DC inverter" technology, the system delivers an energy efficiency ratio (EER) exceeding 10.0, perfectly combining high energy efficiency with low-noise operation. Notably, data from Bondun’s monitoring systems indicates that the unit operates under partial-load conditions more than 90% of the time; compared to fixed-frequency models, this inverter unit offers 15% greater energy savings.

2. Highly corrosion-resistant pure titanium heat exchanger

Features an aerospace-grade pure titanium heat exchanger (≥99.9% titanium content) with exceptional resistance to chloride ion corrosion, ensuring equipment durability and an extended service life.

3. Unique air duct design

Featuring an innovative isolated airflow design, the system completely separates the airflow path from the refrigerant piping; this effectively prevents chlorine-induced corrosion of the copper tubes, ensuring long-term, stable, and worry-free operation.

4. Smart remote control and 24-hour online monitoring service

Equipped with an advanced remote connectivity module, the system enables effortless remote control via smartphone, centralized management, and real-time remote diagnostics, allowing for easy adjustment of humidity, temperature, and air quality. Additionally, an intelligent sensing system automatically adapts operating modes based on changing indoor and outdoor conditions, ensuring the pool environment remains in optimal condition at all times.

Four operating modes—a new realm of dehumidification.

Dehumidification + Pool Water Constant Temperature Mode

The swimming pool dehumidification heat pump utilizes heat pump technology to dehumidify the indoor pool environment by capturing latent heat from the pool air via an evaporator; simultaneously, it employs a titanium heat exchanger to provide auxiliary heating to the pool water and maintain a constant water temperature.

Dehumidification + Air Heating Mode

The unit dehumidifies the indoor pool environment by extracting latent heat from the indoor pool air via the evaporator; this recovered heat is then utilized to warm both the incoming outdoor fresh air and the dehumidified air, thereby regulating the indoor air temperature and ensuring a comfortable balance of humidity and temperature.

Dehumidification + Cooling Mode

The pool dehumidification heat pump dehumidifies the indoor pool environment by absorbing latent heat from the indoor pool air via the evaporator, while simultaneously releasing that latent heat outdoors through the outdoor condenser, thereby achieving both cooling and dehumidification effects.

Dehumidification + Ventilation Mode

The pool dehumidification heat pump exhausts a portion of the indoor pool's high-humidity air outdoors. Meanwhile, the remaining humid air mixes with low-humidity fresh air drawn in from outside to produce air that is both dry and oxygen-rich; this air is then supplied to the indoor space, achieving cost-effective dehumidification.

Widely used in diverse settings.

With its outstanding performance and versatility, the BANDON "three-in-one" pool dehumidification heat pump has become the preferred solution for maintaining constant temperatures in pools and hot springs at high-end venues—including Olympic sports centers, stadiums, fitness centers, schools, water parks, hotels, clubs, and private villas. It not only effectively resolves issues related to high humidity and temperature fluctuations in pool and spa areas but also sets a new trend in equipment design through its eco-friendly, energy-efficient approach.

Utilizing advanced dehumidification technology, the system rapidly reduces indoor humidity and refreshes the air, creating a dry and comfortable swimming environment. Meanwhile, its intelligent temperature control system precisely regulates water temperature, ensuring consistency throughout the seasons and making every swim a truly enjoyable experience.

In an era of growing environmental awareness, the "three-in-one" pool dehumidification heat pump stands out as a model of energy efficiency and emission reduction. Compared to traditional pool heating and dehumidification systems, it utilizes energy more effectively and lowers electricity consumption. Furthermore, its ultra-quiet operation ensures no disturbance to the surrounding environment, truly delivering the combined benefits of high efficiency, silent performance, and eco-friendliness.

A perfect pool is more than just a place for water—it is a blend of health and comfort. The "three-in-one" pool dehumidification heat pump redefines standards for the pool environment, creating a space that is healthier, more comfortable, and environmentally friendly. Choose the BANDON "three-in-one" dehumidification heat pump to start a new chapter in your pool lifestyle and savor every moment of health and well-being.